WirelessHART Test System

WirelessHART Test System Documentation
Documentation Menu Click on the options below to obtain product documentation. View User Guide View Change Log Getting Started The WirelessHAR...
Thu, 27 Aug, 2020 at 4:11 PM
WirelessHART Test System Change Log
Current Released Version Release 1.9 - Aug 2020 Pre-Requisites HART Test System v3.6 The following changes are included in this release: Wireless App...
Thu, 27 Aug, 2020 at 4:08 PM
WirelessHART Test System Data Sheet Download
Please download the attached Data Sheet (PDF).
Thu, 27 Aug, 2020 at 4:03 PM
I already own a HART Test System and want to buy the WirelessHART Test System (KIT-193)
Existing HART Test Systems (KIT-192) can be upgraded to be compatible with the WirelessHART Test System (KIT-193). In order to obtain the latest WirelessHA...
Mon, 22 Mar, 2021 at 6:39 PM
How do I setup the WirelessHART Test System (KIT-193) to run TML Tests?
To set up your WirelessHART Test System to run the wireless TML Tests, connect one Access Point (AP) to a USB port on the Test System. Currently, only one ...
Mon, 24 Jan, 2022 at 3:54 PM
Configuration Change Counter is not incrementing
A good test for this is to send Command 17 with a different message prior to running UALU005.  The test sends Command 17 with the following contents: 0x...
Fri, 17 Jun, 2016 at 10:00 AM
WirelessHART Test System Quick Start Guide
Hardware Setup Connect a registered RS-232 HART modem between the Serial Port marked “RS232-0” on the HART Test Appliance and the Maintenance Port of the W...
Tue, 18 May, 2021 at 4:59 PM
How do I run Application Layer tests wirelessly via a GW?
Please update your HTS (HART Test System) immediately if the version of Kit-192 on it is older than v3.6. The procedure described below is not applicable...
Wed, 17 Nov, 2021 at 9:41 AM
How do I find out the version of my WirelessHART Test System
To determine the current installed version of the WirelessHART Test System tools (Kit-193) on your system, open a linux terminal on your HTS (HART Test Syst...
Wed, 24 Nov, 2021 at 12:08 PM
Why do some Burst Tests fail when run via commercial Gateway?
When using a commercial gateway to test WirelessHART Device's Application Layer, the messages burst by the DUT must be able to pass through the Gateway....
Thu, 16 Dec, 2021 at 1:46 PM