WirelessHART Test System

WirelessHART Test System Documentation
Documentation Menu Click on the options below to obtain product documentation.        The WirelessHART® Test System includes wireless acce...
Sat, 9 May, 2020 at 4:47 PM
WirelessHART Test System Change Log
Current Released Version Release 1.8 - August 2017 The following changes are included in this release: TDMA-Mesh Layer Scripts Modified tests to b...
Tue, 5 Sep, 2017 at 7:53 AM
WirelessHART Test System Data Sheet Download
Please download the attached Data Sheet (PDF).
Fri, 15 Nov, 2019 at 10:09 AM
I already own a HART Test System and want to buy the Wireless HART Test System (KIT-193)
Existing HART Test Systems (KIT-192) can be upgraded to be compatible with the Wireless HART Test System (KIT-193). Enroll your HART Test System (KIT-...
Wed, 5 Dec, 2018 at 2:12 AM
How do I setup the WirelessHART Test System (KIT-193) to run TML Tests?
To set up your WirelessHART Test System to run the wireless TML Tests, connect one Access Point (AP) to a USB port on the Test System. Currently, only one ...
Fri, 28 Feb, 2020 at 1:08 PM
How do I run the Burst DD Tests on a WirelessHART device?
WirelessHART Test System v1.9 includes test cases that cover all Burst DD Test requirements. There is no need to follow this article for WirelessHART...
Thu, 14 May, 2020 at 11:44 PM
Configuration Change Counter is not incrementing
A good test for this is to send Command 17 with a different message prior to running UALU005.  The test sends Command 17 with the following contents: 0x...
Fri, 17 Jun, 2016 at 10:00 AM
WirelessHART Test System Quick Start Guide
Hardware Setup Connect a registered RS-232 HART modem between the Serial Port marked “RS232-0” on the HART Test Appliance and the Maintenance Port of the W...
Tue, 30 Jul, 2019 at 2:56 PM
How do I run Application Layer tests wirelessly?
Application Layer tests are run wirelessly only on WirelessHART devices. If your device is not a WirelessHART device, do not try to run these tests wirel...
Mon, 4 May, 2020 at 4:26 PM
How do I find out the version of my WirelessHART Test System
To determine the current installed version of the WirelessHART Test System tools (Kit-193) on your system, open a linux terminal on your Test System and typ...
Tue, 5 May, 2020 at 9:15 AM