HART Test System
KIT-192
If the slave does not respond to a message it is considered an error. If the slave does not respond to a retry it is another error. If the slave answers the...
Fri, 22 Jan, 2016 at 10:39 AM
The first step is to determine the current installed version of the Test Software on your system. Open a terminal on the HART Test System, type “kit192ver...
Tue, 19 Feb, 2019 at 10:56 AM
Question: Hsniffer is on the second serial port on the test box but it is not working. The program starts but it does not display any test messages ...
Mon, 3 Oct, 2016 at 11:15 AM
Event notification requires, and is built upon, Burst Mode operation. If Burst Mode is supported then all commands for Event Notify should be suppor...
Mon, 1 Aug, 2016 at 12:30 PM
These test cases are likely failed because a device is monitoring RT2 while in the RCV_MSG state machine.
Remember that as soon as RT2 expires (...
Fri, 30 Sep, 2016 at 9:36 AM
This is why the test specification says to contact us if you exceed those values.
It is reasonable to expect certain devices (such as flow) may sup...
Wed, 10 Aug, 2016 at 10:10 PM
Are you running Analys (HSniffer) and DLL tests in DOS mode? Note that you must reboot a Windows 95 PC into DOS mode, this is not the same thing as a c...
Fri, 30 Sep, 2016 at 9:26 AM
The log files generated from Post Processing can include complete logging information by using the –c and –l command line options. For instance: ppp000xxx...
Wed, 10 Aug, 2016 at 10:41 PM
Device specific commands are ignored and will not effect the outcome of the test. It is up to the manufacturer to verify the correct operation.
Wed, 10 Aug, 2016 at 10:43 PM
The Test Specification does not mention the setup required for the device before executing the test. Please disarm the device before running CAL073.
Thu, 2 Mar, 2017 at 12:38 PM