There are two sets of tests to perform. Test via FSK maintenance port and test via UDP connection to a gateway which will communicate wirelessHART to the DUT.


Install the Burst DDs


  1. Download the attached zip file f982.zip.
  2. Open or create directory C:\HCF\DDL\Library\0000f9\f982 on your test system
  3. Open the appropriate sub-folder: 
    • Use the "wireless device" folder to test a WirelessHART device
    • Use the "wireless adapter" folder to test a WirelessHART Adapter
      4. Copy the contents of the sub-folder into the directory C:\HCF\DDL\Library\0000f9\f982  



Test 1 (via FSK Maintenance Port)

  1. Attach a HART Modem from the PC to the DUT (Device Under Test).
  2. Start Wi-ANALYS.
  3. Log Wi-ANALYS data to a filename consistent with the test running (ie DLL936a.fsk.log)
  4. Join the DUT to the system test network.
  5. Attach a HART Modem from an ANALYS (HSniffer) PC to the DUT.
  6. Start ANALYS (HSniffer). (record to file with the name of the test, for instance "DLL036a.OUT")
  7. Launch SDC-625 and find the DUT (you can use SDC via HART Server or HART Modem Server)
  8. The SDC-625 will say "Requested DD had an error or was not found. A generic DD will be loaded. \HCF\DDL\Library\0000f9\f982\xxxx.fm8"
  9. Click "OK".
  10. Immediately after SDC opens the device, choose Main\Online\Test Burst Functions\ then choose the desired testcase set you want to run. Finally, select an individual testcase to run.
  11. At the completion of the test, the result will be either pass for fail.
  12. Stop ANALYS (HSniffer).
  13. Stop Wi-ANALYS.
  14. Copy log and OUT files to a safe location.


Test  2 (via UDP)

  1. Connect the test PC to a wirelessHART gateway. (use HART Server to connect via UDP to the wirelessHART gateway, save the configuration).
  2. Start Wi-ANALYS.
  3. Log Wi-Analys data to a filename consistent with the test running (ie DLL936a.udp.log)
  4. Join the DUT to the test system network.
  5. Start "Communication Log.exe" on the test PC. Be sure to select log to file. 
  6. Launch SDC-625 find the DUT (use SDC via HART Server to connect via UDP to the wirelessHART gateway then to the device)
  7. The SDC-625 will say "Requested DD had an error or was not found. A generic DD will be loaded. \HCF\DDL\Library\0000f9\f982\xxxx.fm8"
  8. Click "OK".
  9. Immediately after SDC opens the device, choose "Main\Online\Test Burst Functions\" then choose the desired testcase set you want to run. Finally, select an individual testcase to run.
  10. At the completion of the test, the result will be either pass for fail.
  11. Stop SDC-625
  12. Communication Log.exe will quit when SDC closes. Save and name the file after the testcase, for example "DLL036a.sdc.log".
  13. Stop Wi-ANALYS.
  14. Copy sdc.log and udp.log files to a safe location.